working fluid

Study on the Pressure Test Working Fluid of Refrigeration Pressure Vessel and it ′ s Application Technique

在用制冷压力容器试压工质及其应用技术的研究

Modeling of Aqueous Electrolyte Solution by Statistical Mechanic Theory; EVALUATION OF CHARACTERISTICS OF AMTEC WITH POTASSIUM WORKING FLUID

用统计力学理论研究电解质溶液的热力学性质钾工质碱金属热电直接发电器件特性评价

While the spraying angle of coolant fluid and the distance between the working rolls and the nuzzles have little influence.

对流换热特性对喷嘴与工作辊之间距离的变化不敏感，冷却液喷射角度的变化对对流换热特性有一定的影响。

Taking the compressible fluid as working medium, an optional design of valve plate of axial piston pump is engaged, where the configurational dimensions of the valve plate are evaluated according to the air content in the oil.

以可压缩流体为工作介质，对轴向柱塞泵配流盘进行了优化设计，即根据油液含气量的变化，合理计算配流盘的结构尺寸。

As a new flow component, the ice valve was developed to close or open the liquid flow running inside a micro/ nano channel based on the freeze/ thawing phase change of the working fluid using a thermoelectric cooling device.

冰阀是一种利用微/纳米流道内流体自身的冻结/融化相变过程来实现关断或开启作用的新型流体元件。

State-of-the-art and Prospect of the Natural Working Fluid& Carbon Dioxide Experimental Study on Heat Transfer Characteristics of Thermal Syphon under Different Natural Working Fluid

天然工质CO2的发展现状与前景展望CPU重力热管使用不同天然工质时的传热特性实验研究

Implement continuous improvement in the wastewater treatment system, RO system, and metal working fluid system.

负责废水处理系统, 纯水系统, 以及金属切削液系统的持续改进行动.

Evaluation of characteristics of AMTEC with potassium working fluid

钾工质碱金属热电直接发电器件特性评价

Combined oil pump, power source of the machine, provides working fluid with certain pressure.

组合油泵是本机工作的动力源, 它供给具有一定压力的工作液.

Design of Flow Boiling Heat Transfer Experiment System Using Alternative Refrigerant as Working Fluid

替代制冷剂流动沸腾传热实验台设计建造与探讨

Comparison of performance between non-azeotropic mixtures working fluid and R22

一种非共沸循环工质与R22的性能对比实验

Deionized water and tap water with different ion concentration and electrical conductivity were used as the working fluid.

所采用的极性流体是具有不同离子浓度和导电率的去离子水和自来水。

In order to determine the void fraction in neutron moderator, the circulation ability of the two-phase hydrogen thermal siphon system, and the structure of components of the CNS, the mockup test was performed using Freon-113 as working fluid.

针对概念设计中采用的两相虹吸氢回路系统，使用氟里昂113进行了1：1的模化试验研究，确定了中子慢化室含气率、热虹吸系统循环能力及各部件的初步结构形式和尺寸。

Thermal vapour compressor ( TVC) belongs to gas-ejectors using steam as the working fluid.

热力蒸汽压缩器是一种以蒸汽为工质的气体喷射器。

Any thermal cycle or working fluid could be considered.

可以采用任何形式的热循环和工作流体。

The experiment apparatus for measuring the thermal conductivity coefficient of fluid by the transient double hot wire technique has been established. The working equations have been derived correspondingly.

建立了双热线瞬态热线法测量流体导热系数的实验装置，推导出了相应的工作方程。

Capillary pumped loop ( CPL) is an advanced temperature-control device. Heat transfer in CPL is realized with phase transition of working fluid, and the capillary pressure is used for overcoming the resistance in circulatory flow.

毛细抽吸两相流体回路（简称CPL）是一种先进的控温装置，它采用相变传热方式并利用毛细力来克服工质循环流动的阻力。

All turbines are alike except for their working fluid.

所有涡轮机除了工作介质以外,其它方面都相似.

The numerical analysis shows that the temperature field of the radiator gets uniform apparently when the working fluid flows.

结果表明：辐射器内工质的流动对辐射器的温度分布有明显的改善作用；

Capillary Pumped Loops ( CPLs) and Loop Heat Pipes ( LHPs) are two-phase heat transport devices which utilize the capillary forces developed in evaporator wick to drive the working fluid. They are capable of transferring large heat loads over long distances with small temperature differentials.

毛细泵回路（CPLs）和环路热管（LHPs）是一类两相热传递装置，它利用蒸发器中毛细芯的毛细力驱动工质流动，具有传输距离远，传输功率大，温差小等特点。

Absorption refrigeration is an energy saving refrigeration technology and an effective approach to utilize low grade heat as driving power and its working fluid is natural cryogen.

吸收式制冷是一种可以直接采用低品位的热能作为驱动能源的制冷方式，并且利用天然工质作为制冷剂，是一种节能环保的绿色技术。

An experiment system is set up for testing the thin film evaporator by adjusting the fluid amount, heating power and system pressure, with deionized water as the working fluid.

本文搭建了一套实验系统，以去离子水为工质，通过调节进液量、加热功率、系统压力等方法测试所研制蒸发器的传热性能。

To predict the rising velocity of hydrogen gas and the influencing factors, a suitable working fluid was determined for experimental simulation on the vold fraction of hydrogen in a neutron moderator.

为了推断中子慢化剂液氢中气化氢气泡的上升速度及影响因素，选取合适的工质进行了含气率的模拟实验。

Test of working characteristics of dielectric fluid in EDM

电火花成形加工工作液应用工艺特性试验

Effect of microchannel structure and working fluid on flow boiling in microchannels

微槽结构和工质对槽内流动沸腾的影响

In the fluid test, working process in the cylinder such as compression process is simulated by hydrodynamic analysis tool, with the law of flow, temperature and pressure field variety obtained.

流体动力试验部分利用了计算流体动力学分析（CFD）工具进行了缸内过程（如压缩过程）的流体动力学仿真，得到了缸内流场、温度场和压力场的分布和变化规律；

WEDM include: high-frequency pulse power, wire tube, machine bed, the working fluid circulation system, motion control components.

电火花线切割机床包括：高频脉冲电源、丝筒、机床床身、工作液循环系统、运动控制等部分。

Conduct test on wastewater treatment, RO, Paint, phosphate, degrease , metal working fluid, cleanness.

常规测试包括废水处理, 工业纯水, 喷漆, 磷化, 脱脂, 切削液, 清洁度等.

It is usually difficulty to obtain film coefficients between the working roll and the coolant fluid as we solve the temperature field of the roll.

工作辊与冷却液之间对流换热系数的确定是轧辊温度场分析的难点。